A dual channel phantom power supply unit designed to power up to 2 condenser (electret) microphones.

Housed in a robust ABS plastic case
•On/Off power switch with integral LED
•Supplied with ten 280mm DC-DC power leads
•Mains adaptor supplied
•Power supply........12Vdc, 1A
•Output........9Vdc, 100mA / outlet
•Dimensions........134 x 50 x 43mm
•Weight........219g

A professional quality, very stable, microphone stand with boom arm. Available in chrome or black with black accessories. Height adjustable from 0.95m to 1.6m.

Mic holder adaptor includedBoom arm........810 x 14mm
•Height........0.95 - 1.6m
•Weight........3.0kg

A professional quality, very stable, microphone stand with boom arm. Available in chrome or black with black accessories. Height adjustable from 0.95m to 1.6m.

Supplied with microphone holder adaptorBoom arm........810 x 14mm
• Height........0.95 - 1.6m
• Weight........2.6kg

Carrying bag for two mic stands with two separate inner bags.

Standard 5/8" thread
•With rubber feet
•Available in black or chromeHeight........0.8 - 1.65m
•Dimensions : Base........250mmØ
•Weight........2.5kg

Microphone stand with 3 foldable legs. Easy to install and to store. The supplied adaptor features 3 different external thread dimensions: 1/4", 3/8" and 5/8".

Low impedance, dynamic microphone
• 5m microphone lead (XLRM-6.3mm mono)
• Black microphone stand with boom arm
• Black nylon carry bag
• Microphone holderFrequency response........50Hz - 15kHz
• Impedance........300 ohms
• Microphone : Connector........XLR
• Sensitivity........-60dB ± 3dB

A versatile C clamp for attaching microphone stands and goosenecks to desktops or other suitable surfaces.

All metal construction
•Suitable for surfaces up to 38mm thick and fitted with protective neoprene pad
•Fits 3/8" and 5/8" threads
•Available in black or silver finish

A versatile C clamp for attaching microphone stands and goosenecks to desktops or other suitable surfaces.

4.5m of mobile rig ladder trussing
• Extremely strong all metal construction
• Ultimax SureLOC tripods with anti-slip mechanisms
• Packs flat for easy transport
• Complete with all castingsMax. height........3.5m
• Max. weight load........60kg
• Top pole........32mmØ

Anti-pop noise protection filter for microphones.

Anti-pop noise protection filter for microphones.

Available in black or coloured (1 x black, 1 x red, 1 x orange, 1 x yellow and 1 x blue)

A pack of 5 foam windshields to fit most sizes of dynamic microphones.

Available in black or coloured (1 x black, 1 x red, 1 x orange, 1 x yellow and 1 x blue)

A pack of 5 foam windshields to fit most sizes of dynamic microphones.

Black metal and chrome finish
•Standard 5/8" thread
•With rubber feetWeight........0.78kg

Small desk top microphone stand. The unit comprises of a heavy, sturdy 100mmØ black metal base with rubber feet and a 60mm high chrome finish stem.

Black metal and chrome finish
•Standard 5/8" thread
•With rubber feetHeight........280mm
•Weight........0.86kg

Heavy duty desk stand with heavy 'V' shaped base offering extra stability. With flexible gooseneck.

Black metal & chrome finish
• Standard 5/8" thread
• With rubber feetHeight........390 - 520mm
• Dimensions : Base........160mmØ
• Weight........1.7kg

A stable desktop stand fitted with a flexible gooseneck, and a heavy metal black base.

Black metal and chrome finish
•Standard 5/8" thread
•With rubber feetHeight........230 - 380mm
•Dimensions : Base........130mmØ
•Weight........1.6kg

Telescopic desk top stand with a heavy, sturdy base.

Spring loaded jaws

Plastic mic holder with 3/8" to 5/8" thread adaptor. Suitable for most microphones with a maximum body diameter of 30mm.

Flexible rubber grip

Plastic mic holder with 3/8" to 5/8" thread adaptor. Suitable for most microphones with a maximum body diameter of 30mm.

Flexible rubber grip

Plastic mic holders with 3/8" to 5/8" thread adaptor.

Flexible rubber grip

Plastic mic holders with 3/8" to 5/8" thread adaptor.

Acoustic isolation via the rubber suspension. Standard screw fixing. Suitable for most microphones with a maximum body diameter of 30mm.

Ideal for microphones of 40mmØ min

The microphone sits securely in a cradle suspended by rubber bands from the metal frame.

Standard screw fixing

Microphone bar to mount 2 microphones on 1 stand. Width 200mm.

Thread adaptor to convert 3/8" thread to 5/8" thread.

A range of metal goosenecks in different lengths in heavy chromed or galvanised black version. Thread 5/8".

A range of metal goosenecks in different lengths in heavy chromed or galvanised black version. Thread 5/8".

A range of metal goosenecks in different lengths in heavy chromed or galvanised black version. Thread 5/8".

A range of metal goosenecks in different lengths in heavy chromed or galvanised black version. Thread 5/8".

A range of metal goosenecks in different lengths in heavy chromed or galvanised black version. Thread 5/8".

A range of metal goosenecks in different lengths in heavy chromed or galvanised black version. Thread 5/8".

5/8" thread
•60mmØ base

Metal, screw mounting base.

5/8" thread
• 60mmØ base

Metal, screw mounting base.

Gold plated connectors
•Prevents unwanted hum on an audio system
•RCA plug inputs to RCA socket outputs
•Length 60cm

Budget microphone stands with boom arm and sturdy base. Height adjustable between 0.95m and 1.6m.

Supplied with microphone holder adaptorBoom arm........810 x 14mm
•Height........0.95 - 1.6m
•Weight........2.6kg

Budget microphone stands with boom arm and sturdy base. Height adjustable between 0.95m and 1.6m.

Length........1.0m

Heavy duty microphone stands with round cast iron base. Height adjustable between 0.8m and 1.65m.

Standard 5/8" thread
• With rubber feet
• Available in black or chromeHeight........0.8 - 1.65m
• Dimensions : Base........250mmØ
• Weight........2.5kg

Heavy duty microphone stands with round cast iron base. Height adjustable between 0.8m and 1.65m.

Microphone holder included
•Stylish black and chrome designMax load........5kg
•Height : Lowest........1.00m
•Height : Max........1.75m
•Weight........1.94kg

Complete microphone and stand kit with carry bag. The kit contains:

Height adjustment........0.5 - 1.05m
•Weight........3.0kg

Microphone desk stand with boom arm. Heavy 150mmØ cast iron base with two piece telescopic stem fitted with a fully adjustable boom arm.

Phantom powered (9 - 52Vdc)
•Excellent frequency response
•Balanced output (XLR male connection)
•Omnidirectional condenser microphoneCutout........20mmØ
•Frequency response........30Hz - 15kHz
•Max. input SPL........120dB, 1kHz @ 1% THD
•Sensitivity........-76dB (± 3dB)
•Dimensions........71 x 30mmØ
•Weight........160g