3-pin XLR plug to 3-pin XLR socket.

For DMX-control or master/slave connection
•Accurate, noise free controlCable........4.0mmØ

3-pin XLR plug to 3-pin XLR socket.

For DMX-control or master/slave connection
•Accurate, noise free controlCable........4.0mmØ

3-pin XLR plug to 3-pin XLR socket.

For DMX-control or master/slave connection
• Accurate, noise free controlCable........4.0mmØ

3-pin XLR plug to 3-pin XLR socket.

For DMX-control or master/slave connection
•Accurate, noise free controlCable........4.0mmØ

3-pin XLR plug to 3-pin XLR socket.

120 Ohms resistor connected between pins 2 and 3
•Reduces reflection interference
•3-pin XLR connectorImpedance........120 Ohms

End-connector for DMX-systems.

30cm (12") active subwoofer
•2 x 25cm (10") satellite speakers
•6 input, 2.1 powered mixer
•2 x balanced XLR inputs with mic preamp peak indicator
•2 x balanced 6.3mm inputs microphone/line
•Main, line and pre outputs
•2 x RCA inputs at the rear
•3 band EQ and auxiliary control on each channel
•Digital echo with repeat and delay on each channel
•Headphone output
•Dual 6 segment LED level indicator
•Castors fitted
•Supplied with 2 x 5m Speakon® connecting leads and 1 x (180.550) speaker stand set
•Power supply........230Vac, 50Hz
•Amplifier output........260Wrms (150W Sub + 2 x 55W Satellite)

The SC-1 is an easy to use compact sound controller for the (150.393) MJC-1X scanner. The SC-1s memory is embedded with 64 light configured programs each with a 4-speed tempo control.

64 built-in programs
•4 tempo settings
•Black-out function
•Suitable for controlling up to 4 units.
•Compact and easy to use
•Power supply........9Vdc, 50mA
•Connector........3-pin XLR
•Dimensions........25 x 48 x 90mm
•Weight........320g

The SY-1 is an easy to use compact sound controller for the (150.402) SY-250 effect light. The SY-1s memory is embedded with 64 light configured programs each with a 4-speed tempo control.

11 DMX channels, program/sound, red, green, blue, strobe, master fader, pan, tilt, pan/tilt speed, pan fine, tilt fine
• Strobe speed adjustable
• Auto/sound activated (8 programs)
• 36 x 1W LEDs (12 red, 12 green, 12 blue)
• DMX in/out connections via 3-pin XLR.
• Self test function
• Blue 7 segment LED display
• Fitted with On/Off switch and fixed 1.5m mains lead
• Fan cooled
• Lightweight plastic housing
•Power supply........230Vac, 50Hz (100W)
• Beam angle........10°
• DMX channels........11
• Head movement : Pan........540°
• Head movement : Tilt........230°
• Dimensions........250 x 220 x 376mm
• Weight........5.9kg

Running light control unit with 4 channels and 16 patterns.

Each output can be controlled separately and is fitted with an automatic safety provision with indicator lamp
• Lamp pre-heating adjustable up to 50%
• Power supply 230V single-phase or 230/400V three-phase for extreme loads
• Connections via screw terminals
• DMX in/out connections via 3-pin XLR connectors. Analogue connections via 8-pin DIN plugs
• Fan cooled
• 19" rack mountable
•Power supply........230Vac/400Vac
• Current per channel........10A max.
• Max. load........60A
• Dimensions........89 x 482 x 430mm
• Weight........8.8kg

6-channel dimmer control suitable for DMX512 or analogue 0-10V control. Convenient for professional applications due to the heavy-duty 20 Amp outputs.

A weather resistant (IP44 rating) rope light system for indoor and outdoor use
•Consisting of a flexible 13mm diameter plastic rope containing bulbs at 27.7mm intervals
•NOTE The rope can be cut ONLY at the cutting points which are marked on the side of the rope light ( 1 meter intervals)
•A range of accessories are available
•Requires power lead 155.040
•Dimmable
•Power supply........230Vac, 50Hz
•Lamp life (hours)........25000
•Length........45.0m
•No. of bulbs........36/m
•Rating........16.4W/m
•Temperature range........-20 - 80°C
•Dimensions........13mmØ