Simple plug-in adjustable gain amplifier with mains socket on the front. Suitable for analogue or digital signals.

Wideband booster for distribution of FM radio, UHF TV, video, cable TV, and satellite signals.
•Adjustable (1-26dB) outlets are ideal for long cable runs in the home
•Available in 1/2/3/4 outputs (adjustable) & 1 low gain output
•Digital or analogue
•Power supply........230Vac, 50Hz (5W)
•Frequency range........45MHz - 860MHz
•Gain : Fixed........7dB
•Gain : Variable........1 - 26dB
•Impedance........75 ohms
•Dimensions........153 x 101 x 49mm

Tough and versatile range of signal boosters, suitable for analogue and digital signals.

Wideband UHF/VHF/FM/DAB frequencies
•12dB gain per outlet, with extremely low noise 1.8dB
•Side inputs for neat cable installation
•Available in 1/2/3 and 4 outlet versions
•Fixed mains lead
•Wall mountable
•Power supply........230Vac, 50Hz
•Dimensions........40 x 70 x 85mm

Simple plug-in adjustable gain amplifier with mains socket on the front. Suitable for analogue or digital signals.

Wideband UHF/VHF/FM/DAB
•Mains socket on the unit, so you don't tie up one of your mains outlets (Note: This socket is only rated at 5A)
•Side coaxial connections for neat cable installation
•Low noise to signal ratio
•Power ON LEDPower supply........230Vac, 50Hz
•Gain........1 - 15dB

Tough and versatile range of signal boosters, suitable for analogue and digital signals.

Wideband UHF/VHF/FM/DAB frequencies
•12dB gain per outlet, with extremely low noise 1.8dB
•Side inputs for neat cable installation
•Available in 1/2/3 and 4 outlet versions
•Fixed mains lead
•Wall mountable
•Power supply........230Vac, 50Hz
•Dimensions........40 x 70 x 85mm

Tough and versatile range of signal boosters, suitable for analogue and digital signals.

Wideband UHF/VHF/FM/DAB
•Mains socket on the unit, so you don't tie up one of your mains outlets (Note: This socket is only rated at 5A)
•Side coaxial connections for neat cable installation
•Low noise to signal ratio
•Power ON LEDPower supply........230Vac, 50Hz
•Gain........1 - 15dB

A unique range of aerial amplifiers with adjustable gain outlets and a fixed low gain output to feed a TV near the amplifier.

1 x VHF/FM and 1 x UHF input
•DC pass allows up to 4 (124.156) Magic Eye remote control extenders to be used
•Suitable for digital or analogue signals
•4 Wideband outputs with DC pass
•Short circuit protection on the UHF input and outputs
•Low noise
•Keyholes for wall mounting
•Fixed 1.7m mains lead and power ON LEDPower supply........230Vac, 50Hz
•Gain : Max.........4 x 10dB
•Impedance........75 Ohms
•Dimensions........170 x 87 x 46mm
•Weight........675g

A unique range of aerial amplifiers with adjustable gain outlets and a fixed low gain output to feed a TV near the amplifier.

Wideband booster for distribution of FM radio, UHF TV, video, cable TV, and satellite signals.
•Adjustable (1-26dB) outlets are ideal for long cable runs in the home
•Available in 1/2/3/4 outputs (adjustable) & 1 low gain output
•Digital or analogue
•Power supply........230Vac, 50Hz (5W)
•Frequency range........45MHz - 860MHz
•Gain : Fixed........7dB
•Gain : Variable........1 - 26dB
•Impedance........75 ohms
•Dimensions........153 x 101 x 49mm

A unique range of aerial amplifiers with adjustable gain outlets and a fixed low gain output to feed a TV near the amplifier.

Wideband booster for distribution of FM radio, UHF TV, video, cable TV, and satellite signals.
•Adjustable (1-26dB) outlets are ideal for long cable runs in the home
•Available in 1/2/3/4 outputs (adjustable) & 1 low gain output
•Digital or analogue
•Power supply........230Vac, 50Hz (5W)
•Frequency range........45MHz - 860MHz
•Gain : Fixed........7dB
•Gain : Variable........1 - 26dB
•Impedance........75 ohms
•Dimensions........153 x 101 x 49mm

A unique range of aerial amplifiers with adjustable gain outlets and a fixed low gain output to feed a TV near the amplifier.

Wideband booster for distribution of FM radio, UHF TV, video, cable TV, and satellite signals.
•Adjustable (1-26dB) outlets are ideal for long cable runs in the home
•Available in 1/2/3/4 outputs (adjustable) & 1 low gain output
•Digital or analogue
•Power supply........230Vac, 50Hz (5W)
•Frequency range........45MHz - 860MHz
•Gain : Fixed........7dB
•Gain : Variable........1 - 26dB
•Impedance........75 ohms
•Dimensions........153 x 101 x 49mm

Tough and versatile range of signal boosters, suitable for analogue and digital signals.

Wideband UHF/VHF/FM/DAB frequencies
• 12dB gain per outlet, with extremely low noise 1.8dB
• Side inputs for neat cable installation
• Available in 1/2/3 and 4 outlet versions
• Fixed mains lead
• Wall mountable
•Power supply........230Vac, 50Hz
• Dimensions........40 x 70 x 85mm

A distribution booster with 2 inputs and 4 outputs, designed to distribute existing quality radio and TV signals around the home, compensating for loss of signal due to long cable runs and also help correct moderately weak signal strength.

1 x VHF/FM and 1 x UHF input
•Automatically senses a mast head amplifier and supplies 12Vdc, 20mA (negative earth) to power it
•Fixed 1.7m mains lead and power ON LED
•4 x Wideband outputs
•No DC pass
•Low noise
•Suitable for digital and analogue signals
•Keyholes for wall mounting
•Power supply........230Vac, 50Hz
•Frequency range........40MHz - 860MHz
•Gain : UHF........4 x 12dB
•Gain : VHF........4 x 10dB
•Impedance........75 Ohms
•Max. noise........5dB
•Max. output........89dBµ V
•Dimensions........170 x 87 x 46mm
•Weight........675g

A 2 input 4 output distribution amplifier with a built-in slope on the gain which boosts the higher frequencies that tend to have more loss when distributed. Designed to distribute existing quality radio and TV signals around the home, compensating for loss of signal due to long cable runs and also help correct moderately weak signal strength.

1 x VHF/FM and 1 x UHF input
•Automatically senses a mast head amplifier and supplies 12Vdc, 40mA (negative earth) to power it
•Full output for long cable runs or to connect to another distribution amplifier
•6 x Wideband & 1 x full outputs
•No DC pass
•Low noise
•Full output terminator plug supplied
•Fixed 1.7m mains lead and power ON LED
•Suitable for digital and analogue signals
•Keyholes for wall mounting
•Power supply........230Vac, 50Hz
•Frequency range........40MHz - 860MHz
•Gain : Full output........20dB
•Gain : UHF........6 x 10dB
•Gain : VHF........6 x 10dB
•Impedance........75 Ohms
•Max. noise........5dB
•Max. output........97dBµ V
•Dimensions........230 x 87 x 46mm
•Weight........862g

A 2 input 6 output distribution amplifier, designed to distribute existing quality radio and TV signals around the home, compensating for loss of signal due to long cable runs and also help correct moderately weak signal strength.

1 x VHF/FM and 1 x UHF input
• DC pass allows up to 6 (124.156) Magic Eye remote control extenders to be used
• Suitable for digital or analogue signals
• 6 Wideband outputs with DC pass
• Short circuit protection on the UHF input and outputs
• Low noise
• Keyholes for wall mounting
• Fixed 1.7m mains lead and power ON LEDPower supply........230Vac, 50Hz
• Gain : Max.........6 x 10dB
• Impedance........75 Ohms
• Dimensions........230 x 87 x 46mm
• Weight........862g

A distribution booster with 2 inputs and 6 outputs, designed to distribute existing quality radio and TV signals around the home, compensating for loss of signal due to long cable runs and also help correct moderately weak signal strength.

1 x VHF/FM and 1 x UHF input
•Automatically senses a mast head amplifier and supplies 12Vdc, 40mA (negative earth) to power it
•Full output for long cable runs or to connect to another distribution amplifier
•8 x Wideband & 1 x full outputs
•No DC pass
•Low noise
•Full output terminator plug supplied
•Suitable for digital and analogue signals
•Fixed 1.7m mains lead and power ON LED
•Keyholes for wall mounting
•Power supply........230Vac, 50Hz
•Frequency range........40MHz - 860MHz
•Gain : Full output........20dB
•Gain : UHF........8 x 10dB
•Gain : VHF........8 x 10dB
•Impedance........75 Ohms
•Max. noise........5dB
•Max. output........97dBµ V
•Dimensions........230 x 87 x 46mm
•Weight........953g

A 2 input 8 output distribution amplifier, designed to distribute existing quality radio and TV signals around the home, compensating for loss of signal due to long cable runs and also help correct moderately weak signal strength.

1 x VHF/FM and 1 x UHF input
• DC pass allows up to 8 (124.156) Magic Eye remote control extenders to be used
• Suitable for digital or analogue signals
• 8 Wideband outputs with DC pass
• Short circuit protection on the UHF input and outputs
• Low noise
• Keyholes for wall mounting
• Fixed 1.7m mains lead and power ON LEDPower supply........230Vac, 50Hz
• Gain : Max.........8 x 10dB
• Impedance........75 Ohms
• Dimensions........230 x 87 x 46mm
• Weight........953g

A distribution booster with 2 inputs and 8 outputs, designed to distribute existing quality radio and TV signals around the home, compensating for loss of signal due to long cable runs and also help correct moderately weak signal strength.

1 x input and 2 x outputs (high and low)
•Extremely low noise allowing high power output to have 26dB gain
•Low gain outlet (6dB) to feed a local TV close to the powerlink
•1.5m fixed mains lead and green power ON LED
•Conforms to BS415/IEC65
•Can be wall mounted (fixing screws supplied)
•Supplied with a 75 ohms terminator plug for any unused output
•Power supply........230Vac, 50Hz (5W)
•Gain........6dB
•Gain : Full output........26dB
•Dimensions........98 x 98 x 48mm
•Weight........387g

The power link is the heart of the Interlink distribution system which, in conjunction with the aerial link and TV link products is able to distribute a signal to up to 33 outlet points.

Group A channels 21-38 to group E channels 38 - 69
•Low loss
•Only for use indoors
•Can be wall mounted (fixing screws supplied)Dimensions........48 x 98 x 35mm
•Weight........100g

Aerial combiner for 2 UHF TV aerials to 1 outlet or down lead. Can be plugged directly into the power link amplifier or used in the loft to feed one down lead cable. Suitable for analogue and digital signals.

Low loss
• Only for use indoors
• Can be wall mounted (fixing screws supplied)Dimensions........48 x 98 x 35mm
• Weight........100g

Aerial combiner for UHF TV and VHF/FM aerials to 1 outlet or down lead. Can be plugged directly into the power link amplifier or used in the loft to feed one down lead cable. Suitable for analogue and digital signals.

Direct plug-in to the power link or fed by coaxial cable
•No power required, can be installed to suit the accessibility of long cable runs
•Available in 2, 3, 4 and 8-way versions

Designed to act as a linear splitter where the only loss that occurs to the signal is the connection loss - what goes in comes out of each output. Can be used as a splitter or junction box to drive other TV links according to signal strength.

Direct plug-in to the power link or fed by coaxial cable
•No power required, can be installed to suit the accessibility of long cable runs
•Available in 2, 3, 4 and 8-way versions

Designed to act as a linear splitter where the only loss that occurs to the signal is the connection loss - what goes in comes out of each output. Can be used as a splitter or junction box to drive other TV links according to signal strength.

Direct plug-in to the power link or fed by coaxial cable
• No power required, can be installed to suit the accessibility of long cable runs
• Available in 2, 3, 4 and 8-way versions

Designed to act as a linear splitter where the only loss that occurs to the signal is the connection loss - what goes in comes out of each output. Can be used as a splitter or junction box to drive other TV links according to signal strength.

Direct plug-in to the power link or fed by coaxial cable
•No power required, can be installed to suit the accessibility of long cable runs
•Available in 2, 3, 4 and 8-way versions

Designed to act as a linear splitter where the only loss that occurs to the signal is the connection loss - what goes in comes out of each output. Can be used as a splitter or junction box to drive other TV links according to signal strength.

Hinged resistive 3-way splitter.

UHF/FM/TV and radio
•Single output to a TV
•Conforms to BS415 - IEC65
•Wall mountable
•Power ON LED, and fixed 1.4 metre mains lead
•Supplied with fixing screws
•Power supply........230Vac, 50Hz (1VA)
•Max. current........50mA
•Output voltage........12Vdc
•Dimensions........90 x 75 x 45mm

12Vdc masthead power supply to drive most 12V negative earth masthead amplifiers.

Inductive

2-way splitter with DC pass on 1 leg.

Resistive

2-way splitter. (no DC pass).

Masthead combiner to combine group A UHF aerials to group E (E covers B & C/D) with DC pass on each leg if required.

Replaces lost or broken remote controls
• Pre programmed for easy set up
• Operates most major control functions
• Note: May not operate every function found on your original remoteBattery........2 x AAA
• Range........8m
• Dimensions........190 x 60 x 20mm
• Weight........135g